Table of Contents
Advertisement
6. Various Scan Settings
• If you select [Batch], scanning starts when you place the additional originals and press the [Start] key.
When all the originals have been scanned, press the [ ] key. If you select [Batch], regardless of the
default settings, the machine waits until additional originals are placed.
• If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF. Select
which operation the machine performs while waiting for additional originals in [Wait Time for Next
Original(s): SADF] under [Scanner Features]. For details about [Wait Time for Next Original(s):
SADF], see "Scan Settings".
1.
Press [Original Feed Type].
2.
Select [Batch] or [SADF].
6
3.
Press [OK].
• For more details about procedures, see "Scanning Multiple Pages of Originals as One File".
• If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF.
However, in the following cases you must press the [Start] key to start scanning additional
originals.
• After scanning additional originals using the exposure glass
• After changing settings while waiting for additional originals
• After opening/closing the ADF
• p.159 "Scan Settings"
• p.138 "Scanning Multiple Pages of Originals as One File"
Divide
This section explains settings for dividing multiple originals by a specified number of pages and then sending
them.
1.
Press [Original Feed Type].
136
Advertisement
Table of Contents
