Table of Contents
Advertisement
3. Sending Scan Files Using WSD
Specifying the Destination Client Computer
This section explains how to specify a destination client computer for the scan files you are sending by
WSD.
You can specify the destination computer using either of the following methods:
• Selecting a destination computer from the destination list
• Searching for a destination computer and then selecting it
3
• If you are using this machine as a WSD scanner, you can specify only one destination per scan job.
Selecting a Destination Client Computer from the Destination List
Use the following procedure to select a destination client computer from the destination list.
Destinations appear in the destination list after you log on to your computer.
• If the destination computer does not appear but the machine is already registered to the destination
computer, press [Update]. This will update the destination list with the latest information.
1.
In the destination list, press the destination computer that you want to send to.
The key of the selected destination client computer is highlighted, and the destination appears in the
destination field at the top of the screen.
• In the destination list, each destination client computer is displayed using up to 20 characters.
• We recommend you register easily recognizable computer names.
• If a WSD-compatible computer is connected to the network, the following five destinations
appear on the display panel automatically. For details about the saving location of files in each
destination, see the relevant computer's settings.
84
Advertisement
Table of Contents
