Table of Contents
Advertisement
2.
Press the [Interface Settings] tab.
3.
Press [Machine IPv4 Address] to specify the machine's IPv4 address.
To specify a static IPv4 address for this machine, press [Specify], and then enter the IPv4 address and
subnet mask.
To obtain an IPv4 address from a DHCP server automatically, press [Auto-Obtain (DHCP)].
4.
Press [IPv4 Gateway Address], and then enter the IPv4 gateway address.
5.
Press [Effective Protocol], and then make [IPv4] active.
Enabling WSD using Web Image Monitor
To use this machine as a WSD scanner, you must first configure the following settings using Web Image
Monitor on a client computer:
• WSD scanner function (default setting: [Off])
Click [Configuration], click [Initial Settings] under [Scanner], and then set [WSD (Scanner)] to [On].
• WSD protocol (default setting: [Active])
Click [Configuration], click [IPv4] or [IPv6] under [Network], and then enable [WSD (Scanner)].
Use the following procedure to set the WSD scanner function to [On].
1.
On the [Start] menu, click [Network].
2.
Double-click the icon for this machine.
3.
Click [Login].
The Web Image Monitor login page appears.
4.
Enter your login user name and password in the [Login User Name] and [Login Password]
boxes respectively, and then click [Login].
Consult your administrator if you require a login user name and password.
5.
On the menu in the left frame, click [Configuration].
6.
Under [Scanner], click [Initial Settings].
The [Initial Settings] page appears.
Before Sending Scan Files Using WSD
3
77
Advertisement
Table of Contents
