Programming and Dialing Personal Speed Dial
To dial a stored Personal Speed Dial number:
1.
Do one of the following.
Press
a.
INTERCOM,
b.
Press bin key for bins 701-710.
Press a Feature Key set up as a Personal Speed Dial key.
c.
•
To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
2.
•
If the programmed route is busy, press an idle line key to reroute the call.
(Optional)
•
You cannot chain Intercom numbers.
Programming and Dialing System Speed Dial
To program a System Speed Dial number:
1.
Do not lift the handset or press any keys.
2.
Dial
(#77).
#SP
3.
Dial the System Speed Dial bin number (normally 200-299).
Press
.
4.
HOLD
5.
Do one of the following.
Enter the line number you want the system to use when dialing your stored number (1-64).
a.
b.
Enter the Line Group number you want the system to use when dialing your stored number (90-98).
Press
c.
INTERCOM
Press
HOLD
.
6.
Enter the number you want to store (up to 32 digits long).
7.
• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.
• To insert a pause, press
• Do not enter a pause or flash into an Intercom code.
8.
Press
HOLD
.
Enter a name for the Speed Dial number.
9.
• See Name Programming Chart (page 153) for more.
10.
Press
HOLD
.
Do one of the following.
11.
a.
Repeat from step 3 to program another bin.
b.
Press
SPEAKER
To dial a stored System Speed Dial number:
Do one of the following.
1.
DSX Feature Handbook
dial
, then dial the Personal Speed Dial bin number (701-720).
#
if you want to enter Intercom codes.
. To insert a Flash, press
MUTE
to exit.
.
FLASH
Speed Dial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 151