NEC DSX-40 Feature Handbook page 43

Using Store and Forward
To place an outside call using Store and Forward:
Do one of the following.
1.
a. Press INTERCOM
• You may optionally be able to dial 90-98.
b.
Press a Switched Loop key + Dial Line Group number (
c. Press Fixed Loop key.
Dial the outside telephone number.
2.
When you have finished dialing, wait 6 seconds or dial # for the call go though,
3.
• The stored number dials out.
Using Store and Forward and Account Codes
To place an outside call when both Store and Forward and Account Codes are enabled:
• With Forced Account Codes for Toll Calls Only, you do not have to enter an Account Code for local calls. Just dial
the call normally.
Do one of the following.
1.
a. Press
INTERCOM
b. Press Switched Loop key + Dial the Line Group number (90-98).
c. Press Fixed Loop key.
Dial the outside telephone number.
2.
Do one of the following.
3.
a. Wait for three beeps (Forced Account Codes only).
b.
[Account Code]
[ACCT]
c. Press your Account Code Feature Key.
Do one of the following.
4.
a. Wait 6 seconds.
b.
[Account Code]
[ACCT]
c. Press your Account Code Feature Key.
d. Dial #.
DSX Feature Handbook
Feature Name
and dial 9 .
and dial (or optionally 90-98).
9
Select Account Code.
Select Account Code.
Central Office Calls, Placing
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
90-98 ).
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 35