Hold Recall Display - NEC DSX-40 Feature Handbook

Hold Recall Display

The Hold recall display identifies:
The type of call recalling the extension.
❥
The extension which initially placed the call on Hold.
❥
The Hold recall displays occurs as the call is ringing the extension that initially placed it on Hold, and after
the call diverts to Key Ring.
Operation
To place a call on System Hold:
Press HOLD .
1.
• The line key winks (on) while on Hold, double-wink (on) while recalling.
• Line keys on Hold are green for your calls - red for your co-workers.
If a call on Hold recalls, you see one of the following.
a.
b.
To pick up an outside call on System Hold:
Press the flashing line key.
1.
• The line key lights solid (green).
To pick up an outside call on system Hold at a co-worker's extension:
• You must know the number of the line that is on Hold.
1. Lift the handset and press
Dial .
2. *4
Dial the number of the line that is on Hold.
3.
• For example, dial 01 for line 1.
To place an outside call on Exclusive Hold:
Press HOLD twice.
1.
• For you, the line key winks (on green) while on Hold, flashes slowly while recalling.
• For your co-workers, the line key is on red while on Hold, flashes slowly (red) while recalling.
If a call on Hold recalls, you see one of the following.
a.
DSX Feature Handbook
Using System Hold
If the extension that placed to call on Hold doesn't have a name:
Hold Recall
STA 301
If the extension that placed the call on Hold has a programmed name:
Hold Recall
300: Attendant
INTERCOM .
Using Exclusive Hold
If the extension that placed to call on Hold doesn't have a name:
Hold Recall
STA 301
Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 87