User Programmable Features - NEC DSX-40 Feature Handbook

Voice Mail
Using Personal Answering Machine Emulation
To activate or cancel Personal Answering Machine Emulation:
1. Select the Call Forwarding options.
[Program + Call Forward]
[Prog + Cfwd]
2. Select or cancel a Personal Answering Machine Emulation.
[Ans Machine]
[MORE + AME]
[None]
[MORE + MORE + NONE]
3. Select the Call Forwarding type.
[All]
[All]
[Trunk Only]
[Trnk]
When Personal Answering Machine Emulation broadcasts your caller's voice:
1. Do one of the following.
Do nothing to have the caller's message automatically recorded in your mailbox.
a.
Press SPEAKER or lift the handset to intercept the call.
b.
• If your extension is in the headset mode, you can only press SPEAKER .
With Call Screening disabled:
c.
Press V-MAIL to stop the broadcast and send the call directly to your mailbox.
• With Call Screening enabled:
d.

User Programmable Features

Feature
Voice Mail
Feature
Voice Mail
172 ◆ Features
Alternately do one of the following:
• Press INTERCOM and dial *3 .
• Press your Call Forwarding Feature Key.
Select Personal Answering Machine Emulation.
• Alternately dial 7 .
• Skip to Personal Answering Machine Emulation (page 168) for more.
Select to cancel Call Forwarding.
• Alternately dial 0 .
Select forwarding all calls.
Alternately dial 2 .
Select forwarding outside calls only.
Alternately dial 8 .
Press V-MAIL to switch to the Call Screening mode.
Setting up a Conversation Record Key
Mnemonic
#KP (#57) + Press key you want to program + HOLD + Dial 17
#KP
+ Enter mailbox number or 0 for your own mailbox +
HOLD
Setting up a Message Center Key
Mnemonic
#KP (#57) #KP + Press key you want to program + HOLD + Dial 24
+ Enter mailbox number + HOLD + CONF + SPEAKER
twice to exit.
Operation
+ SPEAKER twice to exit.
Operation
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
3-5
Access Level
3-5
DSX Feature Handbook