2.11 Lightning Protectors
• The length of earth rod and the required depth depend on the composition of the soil.
Installation of the KX-A207
1.
Secure the protector to a building with the enclosed mounting screws.
2.
Remove about 1 cm (13/32 inch) of insulation from the end of the earth wire. Insert the earth
wire through the bottom of the protector base and secure it to the earth terminal.
3.
Remove about 1.5 cm (19/32 inch) of insulation from the ends of the external and internal
cables, then pass the cables through the rubber packing.
162
Figure 133:
Figure 134:
Figure 135:
Installation