Panasonic KX-TD500 Installation Manual page 197

4.2 Diagnosis
Note
• When executing the T1 card test, set the DIP Switch on the T1 card to "TEST" position.
Item
Card
Result
Error
Indication
Error Message
PB Generator XX
failure
PB Receiver XX
failure
[Loop Back Test]
a)
Click
• "Loop Back Test" screen is displayed.
b)
Specify "External" or "Internal."
c)
Click
• Loop Back Test is executed between the Generator 1 and the Receiver 1.
• After executing the test, the test result is displayed.
198
Table 38: Description
Display
Card No. : Type
OK
NG
See "Error Indication
Table".
Table 39: Error Indication Table
PB Generator is not functioning properly.
XX:PB Generator No.
PB Receiver is not functioning properly.
XX:PB Receiver No.
.
.
Example: When a T1 card is installed in the Slot No. 101.
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no
good).
Description Card
Applied
T1
T1
Utility