Hole
2.
Drive the anchor plug into the hole.
Note
When fixing the KX-TD500 System to the floor, anchor plugs should always be used to prevent
the system from falling over.
Fixing on the Floor
1.
Attach the two floor-fixing brackets to the basic shelf as shown in the figure. Fasten each
bracket with four screws.
2.
Position the shelf on the floor.
Check the alignment and the level of the shelf.
Installation
Hammer
Anchor plug
1 4/32 inch
8/32 inch
2.2 Installation of Shelf
Figure 35:
Figure 36:
69