Panasonic KX-TD500 Installation Manual page 200

[CO-Extension Path Test]
This test is executed by selecting a trunk card in "Card Information" screen.
A trunk port and an extension port are tested in pairs.
a)
Click
• "CO-Extension Path Test" screen is displayed.
b)
Specify a port number of the CO card to be tested.
c)
Specify an Extension Card and its port number to be tested.
d)
Click
• After executing the test, the test result is displayed.
Item
CO Card
Port No.
Utility
.
Example:
When an LCOT card is installed in the Slot No. 104 and a DHLC card is installed
in the Slot No.103.
Table 44: Description
Display/Input Value
Card No. : Type
1-8/ all
.
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
Used to specify the port number of the trunk
card to be diagnosed.
4.2 Diagnosis
Figure 168:
201