Panasonic KX-TD500 Installation Manual page 176

3.
Enter the appropriate communication parameters and the System Programming password.
4.
Click
• Communication between the KX-TD500 and a PC begins.
5.
Point to "Programming" in the Main Menu and click.
• The "Programming" drop-down menu is displayed.
6.
Click "Interactive" in the drop-down menu.
• Communication between the KX-TD500 and a PC begins.
Remote Access Procedure
Starting up the System Administration from a remote location can be done in one of the
following ways:
a)
DISA (Direct Inward System Access)
Dial "Remote FDN" after accessing the KX-TD500 system using DISA feature.
b)
DID (Direct Inward System Access)
Program DID feature so that the incoming telephone number is converted to "Remote
FDN."
c)
DIL 1:I
Assign "Remote FDN" as the destination of a CO line whose "Incoming Type" is set to
"DIL."
d)
Call Transfer to Remote Administration Resource
The call from a remote location can be made on any trunk into the system, and be
answered by an extension user. The call is then placed on hold and the Remote FDN of
the system dialed is received. The extension user transfers the call after receiving the
Maintenance Console Guide
.
3.4 System Administration
Figure 151:
177