System Specifications
This appendix contains two major sections:
•
E1200i AC Chassis Physical Design
•
E1200i AC System Power Requirements
•
E1200i DC Chassis Physical Design
•
E1200i DC System Power Requirements
•
Environmental Specifications
•
Agency Compliance
E1200i AC Chassis Physical Design
Parameter
Height
Width
Depth (without cable management system)
Chassis weight with factory-installed components (backplane
and air filter)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFM3s, RPMs, and 14 line cards)
Mounting
Rack clearance required
Thermal Output
Maximum (fully-loaded chassis with 10-port 10GE line cards) 18,368 BTU/hr
Minimum (chassis with one 10-port 10GE line card)
Specifications
42 inches (106.68 cm)
17.40 inches (44.20 cm)
22.25 inches (56.51 cm)
139 pounds (approx.) (63.05kg)
422 pounds (approx.) (191.2 kg)
Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center mounting
in a 23-inch rack or cabinet.
Front: 18 inches
Rear: 20 inches
2,313 BTU/hr
C
System Specifications
|
81