Panasonic KX-TAW848 Programming Manual page 275

Value Range
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM: An extension line is seized.
F-1–F-36: A CO line programmed for a flexible CO button (F-1–F-36) is seized. A flexible CO button
customized as a Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.10.4 [4-1-4] Wired Extension—Flexible Button
Feature Manual References
1.10.3 Line Preference—Outgoing
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook.
Default
Ringing Line
Value Range
No Line: No line is selected. Select a line by pressing the desired Line Access button to answer a call.
Ringing Line: The longest ringing call is selected.
F-1–F-36: The call arriving at a flexible CO button (F-1–F-36) is selected. A flexible CO button
customized as a Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.10.4 [4-1-4] Wired Extension—Flexible Button
Feature Manual References
1.10.2 Line Preference—Incoming
Call Waiting Tone Type
Selects the type of Call Waiting tone sent to the busy extension.
Default
CW Tone 1
Value Range
CW Tone 1, CW Tone 2
2.10 [4] Extension
PC Programming Manual 275