Panasonic KX-TAW848 Programming Manual page 53
Advanced hybrid & wireless pbx
Hide thumbs
Also See for KX-TAW848:
- Features manual (584 pages) ,
- Feature manual (250 pages) ,
- Operating manual (174 pages)
Table of Contents
Advertisement
A
•
Is the status of the HLC card or preinstalled Hybrid ports set to "INS"?
•
Is a CS connected to the HLC card or preinstalled Hybrid ports? If not, connect one.
•
Do the PINs (Personal Identification Numbers) of the PBX and the Portable Station
match? Confirm that they are the same.
•
Is the Portable Station within transmission range of the CS?
•
Has the Portable Station previously been registered at another location?
It is not possible to register a Portable Station at 2 locations, so use the Forced De-
registration option to delete the previous registration.
Q
I cannot delete the extension number of a Portable Station.
A
•
First, de-register the Portable Station itself, and then delete the extension number.
Q
I cannot de-register a Portable Station.
A
•
Is the Portable Station turned on? If not, turn it on.
•
Is the Portable Station within transmission range of the CS? If not, move it closer to the
CS and try the de-registration operation again.
Q
The Portable Station I want to de-register is broken, and will not turn on, or is
not available, or the registration information was deleted first from the Portable
Station, so it cannot be de-registered.
A
•
The Portable Station can be forcibly de-registered by the following the procedure shown
in Forced De-registration of 2.7.12 [1-2] Portable Station.
Q
I changed the extension number of a Portable Station, but the display of the
Portable Station still shows the old extension number.
A
•
Turn the Portable Station off and back on again, to force it to re-register its location.
Q
I changed the FCO of a Portable Station, but the display of the Portable Station
still shows the old FCO.
A
•
Turn the Portable Station off and back on again, to force it to re-register its location.
Q
If I delete the extension number of a Portable Station, and then turn the
Portable Station off and back on again, it does not function correctly.
A
•
Do not delete the extension number of the Portable Station, as this information is
necessary for it to operate.
Numbering
Q
How do I change the extension number of a wired extension?
A
•
Change the extension number of the target port to the new number, and click Apply.
Next, set the port to OUS status, and then back to INS status.
Q
I changed the extension number of a wired extension while the extension was
engaged in a call, but the display still shows the previous extension number.
A
•
The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
2.6 Help
PC Programming Manual
53
Advertisement
Table of Contents
