6-2] Caller Id Modification - Panasonic KX-TAW848 Programming Manual

Feature Manual References
1.16.4 Speed Dialing, System
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone
number are routed. If a Caller ID Modification Table is being used, the modified number must match
the telephone number above (CO Line Access Number + Telephone Number) in order for the call
to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.12.1 [6-1] System Speed Dial
Programming Manual References
2.15.2 [9-2] DIL Table & Port Settings—CLI for DIL—CLI Ring for DIL—Day, Lunch, Break, Night
Feature Manual References
1.3.1 Caller ID
1.3.10 CLI (Calling Line Identification) Distribution

2.12.2 [6-2] Caller ID Modification

The telephone numbers of incoming callers can be modified automatically by a Caller ID Modification
Table, and then recorded for calling back.
Caller ID Modification
The PBX looks for incoming telephone numbers that begin with an area code programmed in the
Caller ID Modification Table assigned to that trunk group. If it finds such a code, it removes digits and
adds a number to the telephone number. If this modified telephone number is stored as a System
Speed Dialing number, the caller's name can be shown on a PT display and the call can be routed to
a certain extension (CLI destination). A maximum of 4 Caller ID Modification Tables, each containing
10 local/international call data and 1 long distance code, can be programmed. Each trunk group can
select a table for use. Select the desired table from the Modification Table list.
If the telephone number does not contain an area code programmed here, it is modified based on the
Long Distance Code settings.
Area Code (for Local / International Call Data 1–10)
Specifies the leading number (area code) to look for in the incoming caller's number.
Default
Not stored.
2.12 [6] Feature
PC Programming Manual 395