Panasonic KX-TAW848 Programming Manual page 453

Call Hold
• 2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
– Recall—Hold Recall
– Recall—Disconnect after Recall
• 2.8.8 [2-6-1] Numbering Plan—Main—Features
– Call Hold / Call Hold Retrieve
– Call Hold Retrieve : Specified with a Holding Extension Number
– Hold Retrieve : Specified with a Held CO Line Number
• 2.8.17 [2-9] System Options
– Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group key
– Option 1—PT Operation— Hold Key Mode
– Option 4—SLT—SLT Hold Mode
Feature Manual Reference
1.3.2 Call Hold
Call Log, Incoming
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
– Option 5—Incoming Call Display
– Option 7—Incoming Call Log Memory
• 2.10.4 [4-1-4] Wired Extension—Flexible Button—Type
• 2.10.8 [4-2-1] Portable Station—Extension Settings
– Option 5—Incoming Call Display
– Option 7—Incoming Call Log Memory
• 2.10.13 [4-3] DSS Console—Flexible Button—Type
Feature Manual Reference
1.3.3 Call Log, Incoming
Call Monitor
• 2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor
• 2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Monitor
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
– Option 2—Data Mode
– Option 3—Executive Override Deny
• 2.10.8 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
Feature Manual Reference
1.3.4 Call Monitor
Call Park
• 2.8.4 [2-3] Timers & Counters
– Recall—Call Park Recall
– Recall—Disconnect after Recall
• 2.8.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve
• 2.10.4 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for Call Park)
3.2 Feature Programming References
PC Programming Manual 453