Panasonic KX-TAW848 Programming Manual page 426

2.15 [9] CO & Incoming Call
Maintenance Console Location
2.15.2 [9-2] DIL Table & Port Settings
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.4.5 DIL (Direct In Line)
1.17.2 Tenant Service
1.17.4 Time Service
VM Trunk Group
Specifies the number of the VPS trunk group sent to the VPS when the DIL destination is the floating
extension number of a VM (DPT) Group.
The VPS trunk group number is used to allow the VPS to send the applicable greeting message to
the caller.
Default
1
Value Range
1–48
Maintenance Console Location
2.15.2 [9-2] DIL Table & Port Settings
Programming Manual References
None
Feature Manual References
1.4.5 DIL (Direct In Line)
1.19.4 Voice Mail DPT (Digital) Integration
CLI for DIL
When CLI distribution is enabled for a CO line to which DIL distribution is set, incoming CO line calls
will be distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification
number is found in the System Speed Dialing Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a CO line
basis.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
426 PC Programming Manual