Adding A Dhcp Quarantine Area - HP 800 User Manual

NOTE:
Figure 3-40. Add a Quarantine Area Window
quarantined subnets. This limits the enforcement scope to DHCP
requests relayed via these IP addresses, allowing you to restrict
enforcement to only those DHCP requests which are forwarded via
particular routers or layer-3 switches. If set, DHCP traffic coming
from a source IP not listed will be passed without intervention.
Construction of the DHCP relay packet's source IP address is vendor-depen-
dent. Some implementations (for example, Extreme) use the IP address of
the interface closest to the DHCP server as the source IP for DHCP forward-
ing, which means the resultant packet may not have a source IP that corre-
sponds to those used on the endpoint's physical subnet. Check your switch
vendor's implementation to be sure you are entering correct IP information.
Click ok.
2.

Adding a DHCP Quarantine Area

To add a quarantine area:
NAC 800 Home window>>System configuration>>Quarantining>>DHCP
quarantine method radio button>>add a quarantine area
System Configuration
Quarantining
3-87