HP 800 User Manual page 307

c. Click Edit Profile. The Edit Dial-in Profile window appears.
i. Authentication tab – Select the check boxes for the
authentication methods you will allow. This example does not use
additional selections.
ii. Advanced tab – Add three RADIUS attributes:
TIP:
The attributes you select might be different for different switch types. Contact
ProCurve Networking by HP if you would like assistance.
1) Click Add.
Figure 11-21. IAS, Remote Access Policy, Add Attribute
2) Select Tunnel-Medium-Type. (Adding the first of the three
3) Click Add.
4) Click Add again on the next window.
5) From the Attribute value drop-down list, select 802 (includes
6) Click OK.
7) Click OK.
8) Select Tunnel-Pvt-Group-ID.
9) Click Add.
10) Click Add again on the next window. (Adding the second of
attributes.)
all 802 media.
the three attributes.)
802.1X Quarantine Method
Setting Up the 802.1X Components
11-23