HP 800 User Manual page 47

Figure 2-3. Multiple-server, Multiple-cluster Installation
When your network is more complex, you can continue to add clusters as
shown in the following figure:
The system configuration area allows you to select default settings for all
clusters, as well as override the default settings on a per-cluster basis. See
"System Configuration" on page 3-1 for task-based instructions.
The following recommendations should be followed when configuring your
network for best performance results:
A maximum of five ESs per cluster
■
A maximum of 10 ESs per MS
■
■ A maximum of 3000 endpoints per ES
When these recommendations are followed, the following applies:
80% of the 3000 endpoints will be tested in 30 seconds or less
■
■ All endpoints are returned to the proper status within 15 minutes after
a network recovery (power failure, all endpoints attempting to recon-
nect, 3000 endpoints per ES)
Clusters and Servers
Installation Examples
2-5