Setting Up The Supplicant - HP 800 User Manual

802.1X Quarantine Method
Setting Up the 802.1X Components
11-44
• local – In simple configurations, it is possible to span, or mirror, the
switch port into which the DHCP server is connected. The eth1
interface of the Enforcement server is then plugged into the spanned
port and endpoint traffic is monitored on the eth1 interface. In this
case, choose the local option.
Click OK.
3.

Setting Up the Supplicant

Now you must enable the endpoint for 802.1X. If you do not, the endpoint can
never pass the initial challenge from the switch, as the switch searches for an
802.1X-enabled endpoint. This sections describes how to set up the following
endpoints for 802.1X:
■ Windows XP Professional endpoint
Windows XP Home endpoint
■
Windows 2000 Professional endpoint
■
How to enable a Windows XP Professional endpoint for 802.1X:
Windows main window>>Start>>Settings>>Network Connections
Right-click on Local Area Connection. The Local Area Connection windows
1.
appears:
Select Properties.
2.