HP 800 User Manual page 195

Windows>>Start>>Settings>>Control Panel>>Windows
Firewall>>Exceptions tab
1. Select File and Print Sharing. (Verify that the check box is also
selected.)
Click Edit.
2.
3. Verify that the check boxes for all four ports are selected.
Select TCP 139.
4.
5. Click Change Scope.
Select Custom List.
6.
7. Enter the NAC 800 Server IP address and the 255.255.255.0 mask.
8. Click OK.
Select UDP 137.
9.
10. Click Change Scope.
11. Select Custom List.
12. Enter the NAC 800 Server IP address and the 255.255.255.0 mask.
13. Click OK.
14. Select TCP 445.
15. Click Change Scope.
16. Verify that the My network (subnet) only radio button is selected.
17. Click OK.
18. Select UDP 138.
19. Click Change Scope.
20. Verify that the My network (subnet) only radio button is selected.
21. Click OK.
22. Click OK.
23. Click OK.
End-user Access
Firewall Settings
5-11