Cd Text Editing - Kenwood DM-9090 Instruction Manual

CD text editing

By connecting this unit with a KENWOOD CD Text-compatible CD player (which carries "CD TEXT" marking on the rear panel)
through a synchro cord and a digital cord or optical fiber cable, the text (track titles) and music of CD tracks can be copied onto
48
a MD disc. It is not possible to copy the text alone. However, note that the copying of CD text may not be possible with certain
discs.
Preparation
1 Set the amplifier's input selector to CD.
2 Switch off the program mode of the CD player.
3 Put the CD player and MD recorder to stop mode.
4 Set the MD recorder to the DIGITAL mode for accepting the input signal from the CD player.
Copying the CD text
1
Transmit the CD text into the MD recorder.
1 Switch the TITLE INPUT mode on.
2 Select "CDtext LOAD".
3 Set the selection (by pressing the JOG
DIAL).
To delete the CD text data copied on MD:
While "COPY" is lit, press the REC INPUT key to switch the
mode.
2
Record tracks while copying the CD text.
1 Put the CD player in pause mode.
2 Select the CD track to be recorded using the 4 or ¢ key.
3 Put the MD recorder in record-pause mode.
4 Start playback of the CD player.
3
Eject the Mini Disc.
TITLE
INPUT SEARCH
JOG DIAL
4 ¢
DOWN U P
PUSH SET
JOG DIAL
4 ¢
DOWN U P
PUSH SET
0
Each press switches the mode.
1 TITLE not lit
: TITLE INPUT mode is off
2 TITLE blinking : TITLE INPUT mode is on
The modes are switched by rotating the JOG DIAL.
1 DISC
: Disc title
2 001
: Track title
3 PRE 1-PRE 9
: Preset title
4 ALL ERASE?
: Erasing both disc and track titles
5 CDtext LOAD? : Preparing for CD text copy
L 40 30 21 18
TITLE
R
PGM SEARCH
SINGLE C D t
e
L 40 30 21 18 15 12 9 7 5 3 1 0 OVER ( dB) ANALOG DIGITAL
TITLE
1 2 3
R
PGM SEARCH
32kHz
COPY SINGLE C O M P L E T E ! MONITOR
44.1kHz
48kHz
"COPY" blinks
÷ When the text copy function has been set, the text (track titles) is
transmitted from the CD to the MD.
÷ To abort the CD text copy in the middle, eject the copy source CD.
Display after execution
"COMPLETE!" : Copy is completed.
"CAN'T LOAD" : Copy is incomplete.
"CAN'T ACCESS" : A CD text-compatible CD player is not connected
to this unit.
÷ To abort recording in the middle, press the 7 key of the CD player.
Display after execution
"CAN'T COPY" : Copy failed.
WRITING
Information is Mini Disc has been ejected.
being written.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is
Note Note
being written on the Mini Disc.
÷ The copied CD text data is deleted automatically.
DM-9090 (En)
OVER ( dB)
15 12 9 7 5 3 1 0 ANALOG
1
t L O A D ?
x MONITOR
L 40 30 21 18 15 12 9 7 5 3 1 0 OVER ( dB)
TITLE
R
PGM SEARCH
COPY SINGLE 0 0 1 0 :
0 0
"COPY" lights up
EJECT N O D I S C
DIGITAL
2 3
32kHz
44.1kHz
48kHz
ANALOG DIGITAL
1 2 3
32kHz
MONITOR 44.1kHz
48kHz