Recording (Digital Input); Digital Recording - Kenwood DM-9090 Instruction Manual

Kenwood minidisc recorder instruction manual dm-9090
Hide thumbs Also See for DM-9090:
Table of Contents

Advertisement

Recording (DIGITAL input)

Recording is possible using recordable Mini Discs. When this unit is connected with a component equipped with digital output,
such as a CD player, through a digital cord or optical fiber cable, the signal input through the DIGITAL input jack can be recorded
28
in the digital format (this recording is referred to as digital recording). Enjoy high-quality sound of digital recording!
Preparation
1 Open the write protect tab of the Mini Disc to make it recordable.
2 Load the Mini Disc.
3 Check the remaining recording time.
4 Set the amplifier's input selector to the source to be recorded.

DIGITAL recording

1
Adjust the settings if required.
1 Switch the REC MODE on.
2 Select the setting adjustment mode.
3 Set the selection (by pressing the JOG
DIAL).
Go to step 2 if setting adjustments are not
required.
2
Select one of "DIGITAL 1, 2 and 3".
3
To fade in and fade out the music.
Press in stop mode.
4
Select AUTO or MANUAL.
REC MODE
/CHARA.
JOG DIAL
4
¢
DOWN
U P
PUSH SET
JOG DIAL
4
¢
DOWN
U P
PUSH SET
REC INPUT
FADE/
DELETE
AUTO/
MANUAL
Each press switches the mode.
1 REC MODE : off
2 REC MODE : on ("D.REC LEVEL?" displayed.)
The modes are switched by rotating the JOG DIAL.
1 D. REC LEVEL?
: Digital recording level setting.
2 AUTO TIME?
: Setting of the time for detecting a no-sound
blank section during automatic track num-
ber marking.
3 AUTO LEVEL?
: Setting of the level for detecting a non-
sound blank section during automatic track
number marking.
4 FADE TIME?
: Setting of the fading time in fade-in and
fade-out.
5 REC= WRITING? : Setting of the UTOC writing after recording.
÷ For details on the setting adjustment modes, see "REC MODE key".
Each press switches the mode.
1 ANALOG : Analog "stereo mode"
2 DIGITAL 1 : Coaxial input mode
3 DIGITAL 2 : Optical input mode
4 DIGITAL 3 : Coaxial input mode
5 MONO
: Analog "monaural long-play mode"
Each press switches the mode.
1 FADE not lit : Fade mode is off
2 FADE lit
: Fade mode is on
÷ For details on fade-in and fade-out, see "When FADE TIME? is
displayed" (
) and "Faded recording of MD" (
Each press switches the mode.
1 goes off (AUTO) : Track numbers are marked automatically.
2 MANUAL
: Track numbers can be marked as desired.
DM-9090 (En)
7
o
¢
º
).
£
£

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents