Start Recording - Kenwood DM-9090 Instruction Manual

3
Select "AUTO" or "MANUAL".
4
Adjust the recording level. (Main unit only)
1 Play the source to be recorded.
2 Press the ¶ key.
3 Adjust the recording level and balance.
Recording level
(inner knob)
REC LEVEL REC BALANCE
L R
MIN MAX
To decrease To increase
level level
5

Start recording.

1 Press the ¶ key.
Pressing the pause (8) key also allows to can-
cel record-pause mode and start recording.
2 Play the source to be recorded from the
beginning.
6
After recording, eject the Mini Disc.
AUTO/
MANUAL
8 ¶
Recording balance
(outer knob)
REC LEVEL REC BALANCE
L R
MIN MAX
To attenuate To attenuate
the R CH
the L CH
8 ¶
0
Each press switches the mode.
1 goes off (AUTO) : Track numbers are marked automatically.
2 MANUAL
: Track numbers can be marked as desired.
L 40 30 21 18
R
PGM SEARCH
0 0 1
Extinguished in "AUTO" mode, lit in "MANUAL" mode.
÷ The unit enters record-pause mode automatically when the ¶ key is
pressed.
÷ Decrease the level if the red segments of the peak level meter light.
Recording is not possible if the following characters are displayed.
"DISC FULL" : Disc is full
\Erase undesired tracks.
"PROTECTED" : The accidental erasure protect tab is open.
\Close it.
"PLAY ONLY" : A playback-only Mini Disc is loaded.
\Load a recordable Mini Disc.
÷ When the EDIT / SPACE key is pressed during recording, a track
number is inserted in that position.
WRITING
Information is Mini Disc has been ejected.
being written.
÷ The eject (0)key is not accepted during recording.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is
Note Note
being written on the Mini Disc.
Recording (ANALOG input)
DM-9090 (En)
15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
1
MONITOR
MANUAL
‚w
EJECT N O D I S C
27
£
£
DIGITAL
2 3
32kHz
44.1kHz
48kHz
7
9