Cleaning The System - Sanyo VW-VF10BG Technical Data & Service Manual

8. Cleaning the System

Perform cleaning of the system regularly. If the system becomes particularly dirty,
performance may decline, the system may malfunction, or odors may occur.
WARNING
G
Unplug the power cord when cleaning the system.
G
Do not use chlorine-based or acidic detergents when cleaning the water tank, unit, or filters.
Be sure to stop operation and unplug the
power cord.
2
CAUTION
The fan inside the system turns at high speed, and may
cause injury.
Do not use water that is 40°C or warmer.
Doing so may result in deformation or discoloring.
Do not use volatile substances.
Do not wipe with benzene, paint thinner, alkali detergents,
cleansers, scouring powder, or similar substances, and do
not apply commercially available liquid insecticides or similar
substances. Doing so may result in deformation or
discoloring. In addition, if using a chemical wipe, follow the
precautions for that product.
Cleaning the water tank (every day)
Put a small amount of water in the
tank, tighten the cap, and shake to
rinse. Keep the water tank clean at
all times. Be sure to use tap
(drinking) water when filling the
tank.
Cleaning the drainage tank (when disposing of the water)
After disposing of the water in the tank, use tap water to
rinse the tank out.
Before cleaning Cleaning the unit (when it is dirty)
G
Wipe with a soft cloth that has been soaked
in water.
G
If the unit is particularly dirty, use a soft
cloth soaked in a neutral (non-acidic)
detergent diluted with water. Wring the cloth
out well before wiping off the dirt. Then wipe
again with a cloth soaked in water.
2 - 11
Using this System
Water
tank