Yamaha RX-Z1 Service Manual page 24

RX-Z1/DSP-AZ1
2. AP32 TO 938
The input signal is automatically identified and switched.
DSP 0dB
• The signal is output including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SW: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB
DSP THROUGH ~
YSS (Analog)
DSP THROUGH ~
YSS (DD/dts [ES off])
FULL BIT
• The signal is output in digital full bit without including
the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SW: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB
23
2. AP32 TO 938
DSP 0dB
MAIN L/R CENTER REAR C FRONT L/R REAR L/R
-14.0 dBV -14.0 dBV -14.0 dBV -14.0 dBV -14.0 dBV -4.0 dBV +2.0 dBV
2. AP32 TO 938
FULL BIT
MAIN L/R CENTER REAR C FRONT L/R REAR L/R
-8.0 dBV -8.0 dBV -8.0 dBV -8.0 dBV -2.0 dBV -4.0 dBV +2.0 dBV
SW L/R SW MONO
SW L/R SW MONO