Yamaha RX-Z1 Service Manual page 9

• Set Menu Table
No. SET MENU
1. SPEAKER SET
1A CENTER SP
1B MAIN SP
1C REAR L/R SP
1D REAR CT SP
1E LFE/BASS OUT
1F FRONT EFCT SP
1F MAIN LEVEL
2. LOW FREQ. TEST
3. HP TONE CONTROL
4. CENTER GEQ
5. REAR CT GEQ
6. CINEMA EQ
7. INPUT RENAME
8. I/O ASSIGNMENT
8A COAXIAL IN
8B OPTICAL OUT
8C OPTICAL IN
8D CMPNT-V INPUT
9. INPUT MODE
10. PARAMETER INI
11. LFE LEVEL
12. DYNAMIC RANGE
13. SP DELAY
DSP-AZ1
RX-Z1
DSP-AX1UG
14. AUDIO DELAY
15. DISPLAY SET
16. MEMORY GUARD
17. ZONE2 SET
18. 6CH INPUT SET
18A CENTER to
18B SWFR to
19. DUAL MONO
PRESET VALUE SETTING RANGES
LRG LRG, SML, NONE
LARGE LARGE, SMALL
LRG LRG, SML, NONE
LRG LRG, SML, NONE
BOTH SW, MAIN, BOTH
YES YES, NONE
Normal Normal, –10dB
TEST TONE: OFF OFF, ON
OUTPUT: MAIN L/R MAIN L/R, L, C, R, RS, RC, LS, SWFR, FRONT
FREQ.: 88Hz 35, 39, 44, 50, 56, 63, 70, 79, 88, 99, 111, 125, 140, 157, 177, 198, 223,
250, 35-250Hz
BASS: 0dB –6dB — +3dB
TRBL: 0dB –6dB — +3dB
100Hz: 0dB –6dB — +6dB
300Hz: 0dB –6dB — +6dB
1kHz: 0dB –6dB — +6dB
3kHz: 0dB –6dB — +6dB
10kHz: 0dB –6dB — +6dB
100Hz: 0dB –6dB — +6dB
300Hz: 0dB –6dB — +6dB
1kHz: 0dB –6dB — +6dB
3kHz: 0dB –6dB — +6dB
10kHz: 0dB –6dB — +6dB
L/C/R: OFF HIGH: FRQ (Default: 12.7kHz)
FRNT EFCT: OFF 1.0, 1.3, 1.6, 2.0, 2.5, 3.2, 4.0, 5.0, 5.7, 6.3, 7.1, 8.0, 9.0, 10.1, 11.3, 12.7kHz
REAR L/R: OFF HIGH: GAIN –9 — +6dB (Default: -3dB)
REAR CT: OFF PEQ: FRQ (Default: 12.7kHz)
1.0, 1.3, 1.6, 2.0, 2.5, 3.2, 4.0, 5.0, 5.7, 6.3, 7.1, 8.0, 9.0, 10.1, 11.3, 12.7kHz
PEQ: GAIN –9 — +6dB (Default: -4dB)
—
<1>: LDRF All INPUTs
<2>: CD INPUTs except LDRF, COAXIAL IN <1>
<3>: DVD INPUTs except LDRF, COAXIAL IN <1> <2>
<4>: CABLE INPUTs except LDRF, COAXIAL IN <1> <2> <3>
<5>: MD/TAPE All INPUTs
<6>: CD-R INPUTs except OPTICAL OUT <5>
<7>: CD INPUTs except V-AUX
<8>: CD-R INPUTs except V-AUX and OPTICAL IN <7>
<9>: DVD INPUTs except V-AUX and OPTICAL IN <8> <9>
<10>: D-TV/LD INPUTs except V-AUX and OPTICAL IN <7> <8> <9>
<11>: SAT INPUTs except V-AUX and OPTICAL IN <7> <8> <9> <10>
<12>: VCR3/DVR INPUTs except V-AUX and OPTICAL IN <7> <8> <9> <10> <11>
[A]: DVD All video related INPUTs
[B]: D-TV/LD All video related INPUTs except CMPNT-V INPUT [A]
[C]: SAT All video related INPUTs except CMPNT-V INPUT [A] [B]
AUTO AUTO, LAST
The number key of the remote controller is pushed and initialized.
SPEAKER: 0dB –20 — 0dB
HEADPHONE: 0dB –20 — 0dB
SP: MAX MAX, STD, MIN
HP: MAX MAX, STD, MIN
UNIT: meters
MAIN L/R: 3.04m 0.15 — 30.48m
CENTER: 3.04m 0.15 — 30.48m
REAR L/R: 3.04m 0.15 — 30.48m
REAR CT: 2.13m 0.15 — 30.48m
UNIT: feet
MAIN L/R: 10.0ft 0.5 — 100ft
CENTER: 10.0ft 0.5 — 100ft
REAR L/R: 10.0ft 0.5 — 100ft
REAR CT: 7.0ft 0.5 — 100ft
UNIT: sec
CENTER: 0ms 0 — 5.0msec
REAR CT: 3.0ms 0 — 30.0msec
0ms 0 — 160ms
DIMMER : 0 –4 — 0
OSD SHIFT : 0 –5 — +5
BLUE BACK : AUTO AUTO, OFF (not included in DSP-AX1UG)
OFF ON, OFF
ZONE2 OUT: FIX FIX, VAR
CTRL IN: MODE1 MODE1, MODE2 (only RX-Z1)
CENTER CENTER, MAIN
SWFR SWFR, MAIN
MAIN MAIN, SUB, ALL (only J model)
RX-Z1/DSP-AZ1
8