Panasonic PJLink PT-LW330 Operating Instructions Manual page 100

Functional manual
Hide thumbs Also See for PJLink PT-LW330:
Table of Contents

Advertisement

Projection scheme
Built-in speaker
<COMPUTER 1
IN>
<COMPUTER 2
IN/1 OUT>*
3
<VIDEO IN>
Termi-
nals
<HDMI IN>
<AUDIO IN>
<VARIABLE AU-
DIO OUT>
<USB A/VIEWER>*
<USB B/DISPLAY>*
<SERIAL IN>
<LAN>*
4
Power cable length
Cabinet
Dimensions
Weight
Noise level *
7
Operating
environment
Operating
temperature *
environ-
Operating
ment
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*3 The <MONITOR OUT> terminal is only for PT-LB300 and PT-LB280.
*4 This terminal is only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330.
*5 The <USB> terminal is only for PT-LB300 and PT-LB280.
*6 This is an average value. It may differ depending on individual product.
*7 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*8 [Lamp control] will be switched to [
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
100 - ENGLISH
Chapter 6 Appendix - Specifications
[Front], [Rear], [Ceiling/Front], [Ceiling/Rear] (Menu setting system)
PT-LW330, PT-LW280, PT-LB360,
PT-LB330
PT-LB300, PT-LB280
1 (High-density D-sub 15 pin female)
[RGB signal]
0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
P
signal]
Y: 1.0 V [p-p] including synchronization signal, P
B
R
[Y/C signal]
Y: 1.0 V [p-p] C: 0.286 V [p-p] 75 Ω S1 signal compatible
1 (High-density D-sub 15 pin female) (Input/Output switching)
[RGB signal]
0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
1 (Pin jack 1.0 V [p-p] 75 Ω)
1 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
1 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
1 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
USB connector (type A x 1, output DC 5 V, 500 mA maximum)
4
USB connector (type B x 1)
5
1 (D-sub 9 pin, RS-232C compliant, for computer control use)
1 (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
1.8 m (70-7/8")
Molded plastic
Width: 335 mm (13-3/16")
Height: 96 mm (3-25/32") (when adjustable foot shortened)
Depth: 252 mm (9-29/32")
Approx.2.8 kg (6.17 lbs.) *
When set to [
(Normal)] in [Lamp control] : 37 dB
When set to [
(Eco 1)] in [Lamp control] : 33 dB
When set to [
(Eco 2)] in [Lamp control] : 28 dB
5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1 400 m (4 593'); [High land]: [Off])
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1 400 m (4 593') ~ 2 700 m (8 858'); [High land]: [On])
8
20 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Approx. 5 m (16'4-13/16") (when operated directly in front of receptor)
63 g (2.22 ozs.) (including batteries)
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height : 20.5 mm (13/16")
(Eco 1)] automatically when the operating environment temperature is 35 °C to 40 °C.
10 W (monaural) x 1
2 W (monaural) x 1
6
P
: 0.7 V [p-p] 75 Ω
B
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents