Input Search; Auto Keystone - Panasonic PJLink PT-LW330 Operating Instructions Manual

[Input search]

[Auto PC adj.]

[Auto keystone]

[Input search]
This function is used to detect the signals and project the automatic input signals automatically.
1) Press as to select [Auto setup].
2) Press the <ENTER> button.
f The [Auto setup] screen is displayed.
3) Press as to select [Input search].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[On]
[Off]
[Auto PC adj.]
This function is used to set the automatic execution of Auto PC adj. function.
1) Press as to select [Auto setup].
2) Press the <ENTER> button.
f The [Auto setup] screen is displayed.
3) Press as to select [Auto PC adj.].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[On]
[Off]
[Auto keystone]
This function is used to set the automatic execution of Auto keystone function.
1) Press as to select [Auto setup].
2) Press the <ENTER> button.
f The [Auto setup] screen is displayed.
3) Press as to select [Auto keystone].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Auto]
[Manual]
[Off]
Note
f [Input search], [Auto PC adj.] and [Auto Keystone] cannot be set to [Off] at the same time. At least one of them is set to [On].
f In some times the auto keystone maybe correct image imperfectly, manual keystone is required.
f When [Display] → [Project way] is set to [Ceiling/Front] or [Ceiling/Rear], [Auto PC adj.] will be set to [On] automatically,
[Auto keystone] will be set to [Off] automatically and it will be unavailable.
60 - ENGLISH
Chapter 4 Settings - [Expand] menu
This function is used to detect the signals and project the automatic input signals automatically.
This function is used to adjust [Fine sync], [H position], [V position] and [H.Size] automatically
when input the analog computer signal.
This function is used to correct the vertical keystone of the projected image automatically.
Detects the signals and projects the automatic input signals automatically.
Disables the detection of the signals.
Enables the automatic execution of Auto PC adj. function.
Disables the automatic execution of Auto PC adj. function.
When detecting the projector is tilted, correct the vertical keystone in real time.
When pressing the <AUTO SETUP> button on the remote control, correct the keystone in vertical.
Auto keystone function disabled.