Panasonic PJLink PT-LW330 Operating Instructions Manual page 82

[Active audio] / [Disable audio]
[Play video] / [Pause video]
[Start] / [Stop]
[Exit]
Note
f It will take a while when you want to project the computer screen.
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
f The screen resolution of your computer will be switched as follows: PT-LW330 and PT-LW280: 1 280 x 800 (WXGA),
PT-LB360 and PT-LB330 : 1 024 x 768 (XGA).
Termination of the USB display
1) When terminate the USB display, remove the USB cable directly.
f There is no need to following "Remove hardware safely" when a USB cable is disconnected.
When using Mac OS
r Mac OS operating environment
OS
CPU
Amount of memory
Hard-disk free space
Display
f There is no guarantee for all the computers that meet the above conditions will operate properly.
Projecting the USB display
1) Connect the <USB B (DISPLAY)> terminal of the projector to a computer with a USB cable.
2) Press the <MEMORY VIEWER/USB DISPLAY> button on the remote control or switch the input source
to [USB Display].
f You can also press the <INPUT/ENTER> button on the control panel and select the input source in the Input menu.
f The virtual disk which is named "USB Display" will be mounted on desktop.
3) Double-click "Monitor.app" in the virtual disk that has been mounted.
f The computer screen is projected.
4) Right-click the driver icon
f The item which is displayed in gray is unavailable.
[Active audio] / [Disable audio]
[Play video] / [Pause video]
[Start] / [Stop]
[Options]
[Show All Windows]
[Hide] / [Show]
[Quit]
Note
f It will take a while when you want to project the computer screen.
f Connect a USB cable directly to the USB connector of a computer. It will not work when connect through a USB hub.
Termination of the USB display
1) When terminate the USB display, remove the USB cable directly.
82 - ENGLISH
Chapter 4 Settings - Using useful functions
Set whether to output the audio from the computer.
Switch between play and pause the image.
Set whether to display the image from the computer.
Displayed in gray and cannot be selected.
Mac OS X 10.5, 10.6, 10.7
Power PC G4 1GHz or faster
512 MB or more
20 MB or more
Resolution 640 x 480 or more, 1 600 x 1 200 or less
in the dock of computer and select one item in Pop-up menu.
Set whether to output the audio from the computer.
Switch between play and pause the image.
Set whether to display the image from the computer.
Set the items of "Keep in Dock", "Open at Login" or "Show in Finder".
Display the background of computer on the full screen temporarily.
Set whether to display the USB driver icon.
Terminate the USB Display.