Pin Assignments And Signal Names; Serial In> Terminal - Panasonic PJLink PT-LW330 Operating Instructions Manual

<SERIAL IN> terminal
The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled
from a computer.
Connection
Connecting terminals on projector

Pin assignments and signal names

D-Sub 9-pin (female)
Outside view
Communication conditions (Factory default)
Signal level
Sync. method
Baud rate
Parity
Character length
Stop bit
X parameter
S parameter
94 - ENGLISH
Chapter 6 Appendix - Technical Information
D-Sub 9p (female)
D-Sub 9p (male)
Pin No.
RS-232C-compliant
Asynchronous
19 200 bps
None
8 bits
1 bit
None
None
Computer
Communication cable (straight)
Signal name
— NC
TXD Transmitted data
RXD Received data
— NC
GND Earth
— NC
CTS
Connected internally
RTS
— NC
Contents