NEC EXPRESSSCOPE Engine 3 User Manual page 32

help
Syntax:
help [<options>] [<help topics>]
Description:
A basic command, <command>, can be specified for the <help topics>. The help
command displays the help string for specified basic command when <command>
argument is specified.
reset
Syntax:
reset [<options>] [<target>]
Description:
The reset command performs a hardware reset on the <target>.
/admin1/system1 and /admin1/sp1 are available for the <target> of the reset command.
For /admin1/system1, the host system is reset. For /admin1/sp1, the BMC is reset.
Reset the BMC only if a problem occurs in the BMC and don't reset
the BMC in normal operation. Also the connections with Web browser
Notice
and SSH client are disconnected if you reset the BMC.
set
Syntax:
set [<options>] [<target>] <propertyname>=<value>
Description:
The set command is used to set the value of one or more properties of target specified
by the <target>. The command accepts a target specified by the <target> and series of
<propertyname>=<value> pairs which is will try and apply. The <propertyname> means
a name of property set by the command. The <value> means a new value set by the
command.
One or more <propertyname>=<value> pairs can be specified by delimiting between
each pair in space.
The set command requires <propertyname>=<value> command line argument except
when -h is specified as the <options>.
show
Syntax:
show [<options>] [<target>] [<properties>]
Description:
- -
32