NEC EXPRESSSCOPE Engine 3 User Manual page 54

• oemnec_BootPerformanceOptimized
This specifies whether Performance Optimized mode is enabled. This is the dynamic
setting. This property is not displayed if oemnec_BootTimeConfig is disabled.
• oemnec_BootTimeConfig
This specifies whether BootingMode is enabled. This is the dynamic setting. Default
value is "disabled". This property supported by specific product.
• oemnec_NonAggressiveModeCorrectionTimeLimit
Specify the maximum time to take corrective actions in order to bring the system
power consumption back to the specified 'Power Threshold (Pn)' before generating
System Event Log and sending alert. This is the dynamic setting. This property is not
displayed if oemnec_NonAggressiveMode is disabled.
• oemnec_NonAggresiveModeCapvalue
This specifies the value of the power consumption starting he power consumption
control. This is the dynamic setting. This property is not displayed if
oemnec_NonAggressiveMode is disabled.
• oemnec_NonAggressiveModeSetableCapvalue
This specifies the value range of the settable oemnec_NonAggressiveModeCapvalue.
This property is read-only. This property is not displayed if
oemnec_NonAggressiveMode is disabled.
• oemnec_NonAggressiveMode
Non-Aggressive Mode brings the system power consumption under the specified
upper limit threshold without extremely decreasing system performance. The valid
values for this property are "enabled" and "disabled". "enabled" means that the power
control is enabled. "disable" means that the power control is disabled. Default setting
is "disabled".
• oemnec_ExceptionAction_Shutdown_Enable
This specifies whether the shutdown function of the system is enabled when power
consumption control is of no effect within a given
oemnec_AggressiveModeCorrectionTimeLimit after the power consumption pass
oemnec_AggressiveModeCapvalue. The valid values for this property are "enabled"
and "disabled". "enabled" means that the shutdown function is enabled. "disable"
means that the shutdown function is disabled. This is the dynamic setting. This
property is not displayed if oemnec_AggressiveMode is disabled.
• oemnec_AggressiveModeCorrectionTimeLimit (oemnec_CorrectionTimeLimit)
The shutdown of the system will be done according to setting of
oemnec_ExceptionAction_Shutdown_Enable when power consumption control is of
no effect within a given oemnec_AggressiveModeCorrectionTimeLimit (seconds) after
the power consumption pass oemnec_AggresiveModeCapvalue. This is the dynamic
setting. This property is not displayed if oemnec_AggressiveMode is disabled.
• oemnec_AggresiveModeCapvalue (oemnec_PowerCapvalue)
- -
54