Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-HNH100 Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N
3
When you finish talking, press MOFFN or
place the handset on the charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed (each 48
digits max.) are stored in the redial list.
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: "Yes" a MSELECTN a MOFFN
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 19).
For assistance, please visit www.panasonic.com/support

Making/Answering Calls

Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.

Answering calls

1
Lift the handset and press M
when the unit rings.
2
When you finish talking, press MOFFN or
place the handset on the charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 24).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
R If the unit cannot receive caller information,
the following is displayed:
– "Out of area": The caller dials from
an area which does not provide a Caller
ID service.
– "Private caller": The caller
requests not to send caller information.
– "Long distance": The caller makes a
long distance call.
N
N or MZN
N.
13