Call Block - Panasonic KX-HNH100 Operating Instructions Manual

7
MSAVEN a MOFFN
Changing the start and end time
1
MMENUN#237
2
Continue from step 3, "Turning silent
mode on/off", page 26.
Selecting groups to bypass silent
mode
1
MMENUN#241
2
Select your desired groups by pressing
1 to 9.
R " " is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. "
3
MSAVEN a MOFFN

Call block

This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (250 max.).
– "Block a single number": The unit
can reject calls from specific phone
numbers.
– "Block range of numbers": The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly
while caller information is being received. If
the caller's phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 28).
Important:
R Rejected calls are logged in the caller list.
For assistance, please visit www.panasonic.com/support
Storing unwanted callers
Storing a single phone number
Important:
R We recommend storing 10 digits (including
n From the caller list:
1
2
" disappears.
3
4
5
6
7
8
n By entering phone numbers:
1
2
3
4
5
*1
Storing a range of numbers
1
2
3
4
5
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
MCN CID
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
"Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 5.
MMENUN
MbN: "Save CID" a MSELECTN
MbN: "Call block" a MSELECTN
MbN: "Yes" a MSELECTN
Edit the phone number if necessary (24
digits max.).
MSAVEN a MOFFN
MMENUN#217
MbN: "Block a single number" a
MSELECTN
MMENUN a MbN: "Add" a MSELECTN
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
MSAVEN a MOFFN
MMENUN#217
MbN: "Block range of numbers" a
MSELECTN
MMENUN a MbN: "Add" a MSELECTN
Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
MSAVEN a MOFFN
Programming
27