Voice Mail; Liquid Damage - Panasonic KX-HNH100 Operating Instructions Manual

Useful Information
Problem
I cannot operate the answering
system remotely.
The unit does not emit the
specified number of rings.

Voice mail

Problem
"New Voice Mail" is shown
on the handset display. How do
I remove this message from the
display?

Liquid damage

Problem
Liquid or other form of moisture
has entered the handset/hub.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
46
Cause/solution
R The remote access code is not set. Set the remote
access code (page 34).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 34).
R The answering system is turned off. Turn it on (page 35).
The answering system must be activated (page 31) in
order to turn it on remotely.
R If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Cause/solution
R This notification is displayed when your service provider/
telephone company's voice mail service (not the unit's
answering system) has recorded a message for you.
Typically you can remove this notification from the display
by listening to the message. To listen to the message, dial
the voice mail number provided by your service provider/
telephone company (for most cases, this will be your own
phone number), and follow the voice instructions.
Depending on your service provider/telephone company,
you may need to remove all messages from your voice
mailbox to remove the notification. You can also remove
this notification by pressing and holding # until the unit
beeps.
Cause/solution
R Disconnect the AC adaptor and telephone line cord from
the hub. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/hub are
completely dry, reconnect the AC adaptor and telephone
line cord. Insert the batteries and charge fully before use.
If the unit does not work properly, contact an authorized
service center.
For assistance, please visit www.panasonic.com/support