Table of Contents
Advertisement
7.6 Setting Up the Fax Registration
Specifying the Setting for "BATCH TX"
If the batch transmission setting (transmission time) is specified for a one-touch dial
key programmed with recipient fax numbers, multiple documents can be stored in
the memory and sent out together at the specified time.
Note
A one-touch dial key must first be programmed with the fax number of the
recipient for the batch transmission.
To set batch transmitting
1
Select the "FAX REGISTRATION".
H
Refer to "Setting Up the Fax Registration" on page 7-28.
2
For NEFAX691: Press the [5] key
from the 10-Key Pad to select
"BATCH TX".
H
For NEFAX671: .Press the [4]
key from the 10-Key Pad to
select "BATCH TX
3
Press the one-touch dial key
programmed with the recipient
that you wish to send the batch
transmission fax to.
H
For NEFAX691, using the [ ]
and [Ö ] keys to select the one-
touch dial key between [1~32]
and [33~64], then perss the
[Yes Key].
A screen appears, allowing you to specify the transmission time.
?
Was the one-touch dial key that was pressed one programmed for group
NEFAX691
NEFAX671
4
ONE-TOUCH DIAL_33__
7
7-49
Advertisement
Table of Contents
