Setting Up The Report Output - NEC NEFAX 671 User Manual

7.10 Setting Up the Report Output

7.10

Setting Up the Report Output

From the "REPORTING" menu, various functions are available for specifying which
reports are automatically printed.
No. REPORTING
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT
REPORT
Selecting the "REPORTING" menu
1
Press the [Utility] key nine times.
"REPORTING" appears.
2
From the 10-Key Pad, press the key ([1] through [4]) for the "REPORTING"
function that you wish to set.
H
The "REPORTING" functions are as follows:
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT REPORT
Characteristic/Description
Every 60 transmissions/receptions, a report can be printed to show the
results of the transmissions/receptions. This function can be used to set
whether the report is printed automatically when the 60th transmission/
reception is reached.
• The manufacturer's default setting is "ON".
If multiple recipients are specified for transmission, such as with
broadcast transmission and polling reception, a report can be printed to
show specified settings. This function can be used to set whether this
report is printed automatically.
• The manufacturer's default setting is "OFF".
This function can be used to set whether the report showing the result of
a transmission is printed automatically after the transmission is finished.
• The manufacturer's default setting is "OFF".
This function can be used to set whether the report showing the result of
a reception is printed automatically after mailbox reception is finished. (If
regular reception is not finished normally, a report will always be printed,
regardless of the selected setting.)
• The manufacturer's default setting is "OFF".
Utility
7
7-75