Report Print Settings - NEC IT3510 Operation Manual

NEC IT Series
2.3
NEC IT3510/IT2510 Operations Manual

Report Print Settings

This section describes the various settings needed for printing reports.
Report Settings
Transmission Report:
Ë
Sets the report giving details concerning facsimile transmission results.
The factory default setting is If TX Fail (Prints a report if the transmission
was unsuccessful).
Document Image on Report:
Ë
Sets the ability to print a portion of the first transmitted page's image on
the transmission report. The factory default setting is ON.
Activity Report:
Ë
Set whether an activity report is automatically printed after every 50
communications transpire. The factory default setting is ON.
Memory Clear Report:
Ë
Sets whether to print a report notifying that documents were cleared due
to a power failure. The factory default setting is Output ON.
Report Setting
1.
Touch [Report Setting] on
the Administrator
Management screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen in Chapter 3
Registration and Setting
Operations on page 3-12.
Issue 1
4 - 17