NEC IT3510 Operation Manual page 254

Issue 1
3 - 60
Registering Abbreviated Numbers (Continued)
5.
Confirm the abbreviated number
(000~499), then touch [Next].
6.
Use the 10-key Pad to enter the
facsimile number of the
destination, then touch [Com.
Mode]. When the
communications mode is not set,
touch [Next] after entering the
facsimile number, and go to step
10.
i
The destination's facsimile
number can be up to 64 digits.
i
A three second pause may be
added to the number by pressing
<Pause>.
i
If the NEC IT3510/IT2510 is set
for dial pulse (DP) dialing, a
touch-tone can be dialed by
touching [Tone].
Refer to Overseas (International)
Transmission on page 3-62, and
Registering the F Code on page
3-63, if needed.
7.
Select the communications
mode, then touch [Enter].
i
This screen is displayed only
when the optional 2nd G3 Port is
installed.
i
[G3-1] and [G3-2] represent the
two facsimile telephone lines
connected to the machine. This
setting selects which line the
machine will choose when dialing
a destination.
NEC IT Series
Registration and Setting Operations