Confirming The Settings; Figure 1-27 Pressing The Interrupt Key; Section 1 Basic Copy Operations; Section 2 Basic Sending Operations - NEC IT3510 Operation Manual

NEC IT Series
S 8 C
ECTION ONFIRMING THE
Communications and copier settings can be confirmed by using the Mode Check key.
Before Starting Operations:
Facsimile
Destination confirmation screen: The specified destination can be confirmed and
modified.
NEC IT3510/IT2510 Operations Manual
How to Interrupt an Operation
1. Press the <Interrupt> key.
i
To cancel the selection press <Interrupt> once again.

Figure 1-27 Pressing the Interrupt Key

2. Copy or transmit the document.
i
T o copy a document, press <COPY>.
i
To send a facsimile, press <FAX>.
For more information, refer to Section 1 Basic Copy Operations in Chapter 2
Copy Operations on page 2-1, and Section 2 Basic Sending Operations in
Chapter 5 Basic Sending and Receiving Operations on page 5-1.
3. Press <Interrupt>.
4. The machine will return to the pre-interrupted status.
i
The interrupted operation can be continued.
S
ETTINGS
The <Mode Check> button on the operation panel will be used to confirm the settings.
Two confirmation categories exist:
Issue 1
1 - 33