NEC IT3510 Operation Manual page 305

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Power Saving Settings
1.
Touch [Power Save] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen in Chapter 3
Registration and Setting
Operations on page 3-12.
2.
Setting the Power Saving
Function:
1. Touch [Auto-reset].
2. Set the length of time
before Auto-reset is
activated, then touch
[Enter].
i
To select:
Use the 10-key pad to a range
of 1 to 240 m inutes.
W hen [S et: 30sec] is touched,
a 30-second timer is set.
i
If a timer is not
needed:
Touch [No Limit].
i
To change the setting:
Press <C> (clear key) and
re-enter.
Issue 1
4 - 31