Basic Settings And Registration Operation; Basic Settings - NEC IT3510 Operation Manual

NEC IT Series
S 2 B
ECTION ASIC
In order for the the NEC IT3510/IT2510 to properly and efficiently run, it is necessary
to set certain functions and register information into the machine. This is typically
done by a single key user, or administrator, who is in charge of seeing that
parameters such as passwords, report printing, date and time accuracy, facsimile
numbers, and others are properly entered. These basic settings and registration
details will be covered in the following sections.
2.1
NEC IT3510/IT2510 Operations Manual
S R
ETTINGS AND EGISTRATION

Basic Settings

This section will explain setting items required for basic operation of the NEC
IT3510/IT2510.
The following are basic settings:
Setting the Date and Time

Setting the Monitor Speaker and the Alarm Buzzer Volume

Setting the Date and Time
Before starting to use the machine, the current date and time must be set.
This setting is very important, as all reports, transmissions, and receptions will
have the date and time printed on them. What's more, any timed operation
(e.g. Timer Transmission, Polling, Broadcasting, etc.) depends on the correct
date and time.
Before Starting Operations:
Enter the calendar year in the four-digit format.
Enter the time in the 24-hour format.
If the date and time need adjustment, use the same procedure to correct them.
The time setting that is attached to the e-mail header transmission and reception can
be set to a 30-minute difference from standard time.
The standard time-zone for North America (east coast) market models is set to -5:00
UTC. The factory default setting is -5:00.
O
PERATION
Issue 1
3 - 7