NEC IT3510 Operation Manual page 134

Issue 1
2 - 12
Copying with the Manual Bypass Tray (Continued)
Special Paper Mode
When the icons above are displayed
on the paper size selection key, the
special paper mode is set for that
cassette. For details, refer to Section
2.5 Printing Settings in Chapter 4 on
page 4-27.
The icons displayed
description are shown next.
Recycled paper
If this mode has been set, the paper
cassette containing recycled print paper is
not selected when the automatic paper
selection function is enabled. For example, if
both new and recycled paper are loaded into
separate cassettes and the new paper is
mainly used, the new paper is selected as
the priority paper when copying by setting the
cassette containing recycled paper into this
'Recycled paper' mode.
2-Sided Copy is Impossible
This icon indicates that double sided copying
is impossible for the print paper in this
cassette.
The product will not select that particular
cassette in the Auto Paper mode.
Special paper
When this mode is set, the paper is not
selected automatically. For example, this will
prevent accidently printing on special colored
paper, which had been intended only for use as
cover sheets or separators in the printed copy.
i
When Special Paper Mode is set:
Installing the same sized paper in
two cassettes, or more, allows the
unit to automatically switch
between paper cassettes to
continue the print job, if paper
runs out in a cassette.
and their
NEC IT Series
Copy Operations