NEC IT3510 Operation Manual page 282

Issue 1
4 - 8
Unselectable Cassette:
Ë
Sets which paper cassette is to be excluded from the choice of available
cassettes. For example, if a cassette contains colored paper, recycled
paper, or OHP sheets, this particular cassette can be excluded from
being chosen to print the received document. The factory default is No
default.
When the setting is used, the message "Matching paper size is not
available" may appear, even if appropriate paper is loaded.
2-TO-1 Reception:
Ë
Sets whether 2-TO-1 reception is used. The factory default is ON.
Rotation Print:
Ë
Sets whether rotated printing is used. Also, whether the document is to
be sorted, too. The factory default is ON.
Handling of Long Documents:
Ë
Sets whether the received document is to be reduced, or if part of the
image data is cut-off when the received document is longer than the print
paper size. The factory default is Reduced.
Reduction Ratio for Long Documents:
Ë
Sets the reduction ratio for handling long documents.
default is 60% reduction.
Cut-off Length for Long Documents:
Ë
Sets the amount of image to be cut-off when reduction is not selected for
long documents. The factory default is 20 mm.
Reception Settings
1.
Touch [RX Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen in Chapter 3
Registration and Setting
Operations on page 3-12.
Advanced Registration and Setting Operations
NEC IT Series
The factory