NEC IT3510 Operation Manual page 220

Issue 1
3 - 26
Before Starting Operations:
The factory default setting is the One-Touch display.
When the priority facsimile screen is changed, the screen will be switched after
executing Auto-Reset, or by pressing <Panel Reset>.
Setting the Priority Facsimile Screen
1.
Touch [Initial Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen on page 3-12.
2.
Select [Func.], and touch
[Priority Screen].
3.
Select [Priority FAX Screen] on
the Priority Screen.
NEC IT Series
Registration and Setting Operations