NEC IT3510 Operation Manual page 382

Issue 1
6 - 18
2-Sided Transmission
1.
Load the document in the ADF
with the front side face up.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Set 1] from [FAX Menu],
then touch [2-Sided TX].
4.
Select the destination.
5.
Press <Start>. [Scanning] is
displayed.
6.
After the front side of the
document is scanned, load the
document in the ADF with the
reverse side face up.
i
This screen is not displayed if the
2-Sided Document Feeder is not
used.
7.
Press <Start>. Transmission
now begins.
Advanced Sending and Receiving Operations
NEC IT Series