Real-Time Transmission - NEC IT3510 Operation Manual

Issue 1
2.5
6 - 12
At the Relay Hub Station:
Relay group numbers that have been registered in the relay station(s) are used to
select the final receiving stations.
advance. Refer to Section 3.1 Registering Relay Groups in Chapter 4 Advanced
Registration and Setting Operations on page 4-51.
The document being relayed can be printed at the relay hub station, if desired. Refer
to Section 2.1 Transmission Settings in Chapter 4 Advanced Registration and Setting
Operations on page 4-1.
Relay Transmission
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Touch the Program key in which
the Relay Transmission is
registered.
i
Using the Index:
The first index screen is automatically
displayed.
[ ] [ ], or [Index List] to find the
desired Program key.
4.
Press <Start>. Transmission
now begins.

Real-Time Transmission

The Real-Time Transmission feature allows sending documents page-by-
page, without first storing them into memory.
Before Starting Operations:
The ADF is the only scanning method available with this feature.
Real-Time Transmission cannot be used while another document is being sent or
received.
The feature can only be used for a single transmission at a time.
The Timer Transmission feature cannot be used with Real-Time Transmission.
Relay group numbers must be registered in
Touch the index tabs,
Advanced Sending and Receiving Operations
NEC IT Series